FAQ

In this Section
Do I need to purchase special software to configure your modules?
When I do a search on your web page for a solution, I am sometimes given two modules, a 3150/3100 module, and an MVI module. What is the difference?
I'm attempting to use your Modbus module to communicate over my RS-485 network, but I am not getting any communications. What could be wrong?
How do I connect to the Debug Port of my MVI or ProLinx module?
What is the difference between the MVI56-MCM and the MVI56-MCMR?
What is the difference between the 3150-MCM and the MVI46-MCM?
Can the ProSoft SLC communication modules be placed in a remote SLC rack?
How many Modbus devices can I connect to my MCM module?
When using the 1451-9F terminal connector with my 3150 module, do I need to jumper pins 7 and 8 as shown in the manual?
My 3150-MCM is configured to have no Write Data, only Read Data. Occasionally, I am seeing my data overwritten with what appears to be configuration data.
Ive downloaded a configuration to my RLX-FHS radio, but now need to change the configuration. I dont remember the RS232 settings, like baud, parity, handshaking.. etc. I've tried the auto-detect feature, and it fails as well. What can I do?
Can I connect an RLX-FHS to an RLX-FHE?
How is your RLX-IH different from "off the shelf" 802.11b radios?
When using a bit level Modbus function code I can not see my data even though the command does not error, what could be wrong?
What Belden cable does Prosoft recommend for RS485 communications?
InRAx	FAQ list for the InRAx product line.
I just read through the release packet for the new RLXIB-IHW and RLXIB-IESC radios. One note caught my attention. The Client only radio does NOT offer IGMP querying. Does this mean that we should not or cannot use the clients in an I/O system?